DC fast · floor-standing
UC Series
60–360 kW
Two guns, one cabinet, power shared by demand — for highway hubs and high-traffic sites.
CCS2 + CCS2 / CHAdeMO (EU) · CCS1 + CCS1 / CHAdeMO / NACS (NA)
Specs & options of UC Series →
DC wallbox / pedestal
HC Series DC Wallbox & Pedestal Charger, 20–60 kW
A DC charger that mounts on a wall or a pedestal, from 20 to 60 kW with one or two CCS2 connectors. The way to add DC charging where grid capacity is limited or vehicles stay an hour or more.
- Output power range
- 20–60 kW
- Mounting
- Wall / pedestal
- DC output voltage
- 200–1000 V
- Enclosure
- IP54 / IK10
Best for: Fleet depots, dealerships, hotels and car parks where vehicles stay one to two hours
- One or two CCS2 connectors
- Wall or pedestal mounting
- Sprayed stainless-steel housing
- 7" colour touch display
- OCPP 1.6J and OCPP 2.0.1
- RFID and QR-code start
The HC Series brings DC charging to sites that cannot justify — or cannot power — a large floor-standing cabinet. It mounts on a wall or a pedestal and comes in 20, 30, 40 and 60 kW, with one CCS2 connector or two.
Where DC wallboxes make sense
A 60 kW unit adds roughly 50 kWh in an hour, which covers a long day of driving for most cars and vans. That makes the HC Series a good fit for fleet depots that need quick turnarounds between shifts, dealerships that hand over charged cars, and hotels or car parks that want to offer more than AC charging. Compare power classes with the UC Series if your drivers stop for less than 30 minutes.
Small connection, real DC
Input current runs from 31 A per phase (20 kW) to 93 A per phase (60 kW), so many commercial buildings can add an HC unit without a new transformer. Output covers 200–1000 V DC for both 400 V and 800 V vehicle platforms. For an even smaller single-gun unit, see the SC Series.
Technical parameters
HC Series: HC20 – HC60D, 20–60 kW.
Models
| Model | HC20 | HC30 | HC40 | HC40D | HC60D |
|---|---|---|---|---|---|
| Max. output power | 20 kW | 30 kW | 40 kW | 40 kW | 60 kW |
| Input current per phase | 31 A | 47 A | 62 A | 62 A | 93 A |
| Max. output current | 66.5 A | 100 A | 133 A | 133 A | 200 A |
| Connectors | CCS2 | CCS2 | CCS2 | CCS2 × 2 | CCS2 × 2 |
Common data (all models)
- Input
- 400 V AC, 3P+N+PE, 50/60 Hz
- Output voltage
- 200–1000 V DC
- Charging mode
- Mode 4 (IEC 61851-23)
- Voltage / current accuracy
- < ±0.5 % / < ±1 %
- Efficiency
- ≥ 95.2 % at full load
- Stand-by consumption
- < 30 W
- Enclosure
- IP54 / IK10, sprayed stainless steel
- Operating temperature
- up to +55 °C
- Cooling / noise
- Forced air / < 65 dB
- User interface
- 7" colour touch display, LED indicator, emergency stop
- Communication
- OCPP 1.6J / 2.0.1, Ethernet; 4G and Wi-Fi optional
- Authentication
- RFID, QR code
- Dimensions (W × D × H)
- 690 × 300 × 760 mm (single connector) · 690 × 300 × 960 mm (dual connector)
Connector set, cable length and options are configured per order. Ask for a model recommendation →
Frequently asked questions
When should I choose a DC wallbox instead of a floor-standing charger?
When vehicles stay an hour or more, or the grid connection cannot support a 120 kW+ cabinet. A 30–60 kW DC unit gives a large top-up in that time at a much lower connection size.
What does the "D" in HC40D and HC60D mean?
Dual connector — the unit has two CCS2 guns and can serve two parking bays.
Get a quote for the HC Series
Tell us the site type, number of bays, grid capacity and target market. Our engineers recommend models and send spec sheets with the quotation.
Related products
DC compact
CC Series
120–180 kW
High DC power in a small footprint — made for retail car parks and urban hubs.
CCS2 + CCS2 · CCS2 + CHAdeMO
Specs & options of CC Series →DC wallbox / pedestal
SC Series
15–30 kW
A slim wall-mounted DC unit, 15–30 kW, one CCS1 or CCS2 gun.
CCS2 · CCS1
Specs & options of SC Series →