DC fast · floor-standing
UC Series
60–360 kW
Two guns, one cabinet, power shared by demand — for highway hubs and high-traffic sites.
CCS2 + CCS2 / CHAdeMO (EU) · CCS1 + CCS1 / CHAdeMO / NACS (NA)
Specs & options of UC Series →
DC mobile
MC Series Mobile DC Charger, 20–80 kW
A DC charger on wheels that goes to the vehicle instead of the other way round. Plug it into a three-phase supply and charge at 20 to 80 kW wherever it is parked.
- Output power range
- 20–80 kW
- Mobility
- On wheels
- DC output voltage
- 200–1000 V
- Connector
- CCS2
Best for: Roadside assistance, dealer workshops, fleet yards without fixed bays and temporary or event sites
- Castor wheels and carry handle
- CCS2 output, 200–1000 V DC
- Runs from a three-phase supply
- 7" colour touch display
- OCPP 1.6J and OCPP 2.0.1
- Emergency stop
The MC Series is a DC charger built to move. It sits on castor wheels with a carry handle, plugs into a three-phase supply and delivers 20 to 80 kW through a CCS2 connector.
When the vehicle cannot come to the charger
Breakdown services use it to rescue cars with an empty battery. Dealers and workshops roll it to whichever bay needs it. Fleets park vehicles in yards without fixed charging bays, and event organisers need charging for a weekend, not for ten years. In each case a mobile unit avoids digging trenches for a permanent installation.
Pick the model by the supply you have
The limiting factor is usually the outlet, not the car. A 20 kW model draws about 31 A per phase; an 80 kW model needs about 124 A. Choose the largest model your typical supply can carry — see the table below — or ask us to check your site.
Technical parameters
MC Series: MC20 – MC80, 20–80 kW.
Models
Dimensions and weight are confirmed per order.
| Model | MC20 | MC30 | MC40 | MC60 | MC80 |
|---|---|---|---|---|---|
| Max. output power | 20 kW | 30 kW | 40 kW | 60 kW | 80 kW |
| Input current per phase | 31 A | 47 A | 62 A | 93 A | 124 A |
| Max. output current | 66.5 A | 100 A | 133 A | 200 A | 250 A |
Common data (all models)
- Input
- 400 V AC, 3P+N+PE, 50/60 Hz
- Output voltage
- 200–1000 V DC
- Connector
- CCS2
- Charging mode
- Mode 4 (IEC 61851-23)
- User interface
- 7" colour touch display, LED indicator, emergency stop
- Authentication
- RFID, QR code
- Protection
- Over/under-voltage, overload, short circuit, over-temperature, surge, Type A RCBO
- Efficiency
- ≥ 95.2 % at full load
- Operating temperature
- up to +55 °C
- Communication
- OCPP 1.6J / 2.0.1, Ethernet; 4G and Wi-Fi optional
Connector set, cable length and options are configured per order. Ask for a model recommendation →
Frequently asked questions
Does the MC Series have its own battery?
No. The MC Series is a mobile charger that runs from a three-phase grid supply wherever it is plugged in. It does not store energy.
Which model should a dealer workshop choose?
Usually the 30 or 40 kW model — fast enough to charge cars for handover or diagnostics, and it runs on a supply most workshops already have.
Get a quote for the MC Series
Tell us the site type, number of bays, grid capacity and target market. Our engineers recommend models and send spec sheets with the quotation.
Related products
DC compact
CC Series
120–180 kW
High DC power in a small footprint — made for retail car parks and urban hubs.
CCS2 + CCS2 · CCS2 + CHAdeMO
Specs & options of CC Series →DC wallbox / pedestal
HC Series
20–60 kW
Wall- or pedestal-mounted DC charging from 20 to 60 kW, one or two CCS2 guns.
CCS2 · CCS2 × 2
Specs & options of HC Series →